Are you looking to replace or remove your pool fence? Removing a pool fence can be a big job, but it doesn’t have to be!
In this blog post, we’ll go over the steps you need to take in order to do it properly and safely. Read on to learn more about how you can easily remove your pool fence.
Twisting and Pulling the Posts
Twisting and pulling the posts is a crucial step in the process of removing a pool fence.
Before attempting to pull out a post, it’s important to twist it slightly to align it with the sleeve groove.
This helps ensure that the post will come out in one piece without any damage. Once twisted, slowly pull the post straight up and out of its footing.
If the post does not move easily, it may be stuck due to ground moisture. In this case, you can add more water to the area and try twisting again.
After all the posts have been removed, you can then move on to unlatching and dismantling the fence sections.
Releasing the Wing Mechanism
Releasing the wing mechanism is a crucial step in pool fence removal. The operation is relatively simple- just loosen or reverse the jam nut so that the wing mechanism is fully compressed.
This can be done with one hand while the other hand holds the top of the fence post.
Once the jam nut is loosened, it should be easy to remove the safety locking mechanisms between the pool safety fence sections.
It is important to remember that members must not exceed 144 inches and that horizontal members must be on the pool or spa side of the barrier.
By following these steps, you will be able to safely and efficiently remove your pool fence.
Unlatching the Fence Sections
Unlatching the fence sections is a crucial step in the removal of a pool fence.
Protect-A-Child’s Point-Lock Secure Latch is designed to be easily opened by adults while preventing small fingers from unlocking it.
To unlatch each section, an adult must squeeze the fence’s two joint poles together with one hand and use the other hand to release the hook latch.
After the latch is released, the tension in the fence will release, allowing the posts to be lifted out of the post holes.
For more information regarding pool fence removal, shoppers can check out Child Safety Store which carries a variety of pool fence parts and accessories.
Additionally, instructional videos and tutorials can provide further guidance on pool fence removal.
Removing Posts from Post Holes
Removing posts from post holes is a necessary step when removing a pool fence.
Depending on the type of fence, posts may need to be twisted and pulled up or the wing mechanism may need to be released.
Posts can also be removed from the post holes by digging the entire footing out and lifting it from the hole, however, this is a difficult task to do by hand and should only be done if additional help is available.
The Wood Post Puller method is another option for removing posts from post holes as it injects water at the base of the post and loosens the soil around it so that it can be easily extracted.
Shopping for Pool Fences
When shopping for a pool fence, it is important to consider safety features, durability, and cost. All-Safe offers a variety of pool fences to meet any need and budget.
Their fences are designed with safety in mind and are constructed of rust-proof aluminum, making them both durable and long-lasting.
They also offer a wide range of styles, from traditional to modern. All-Safe also offers affordable pricing, making it easy to find the perfect fence for your pool area.
With their helpful customer service team, you can get all the information you need about installing and removing your new fence.
Watching Instructional Videos
Watching instructional videos is a great way to learn how to remove a pool fence.
There are plenty of videos available online which provide step-by-step instructions on how to safely and securely remove a pool fence.
These videos can help you understand the exact process of how to twist and pull the posts, release the wing mechanism, unlatch the fence sections, remove posts from post holes, and shake poles to unstick them.
Watching these videos will ensure that you are able to safely and properly remove your pool fence without any damage or injury.
Pricing for Fence Removal
When it comes to pricing for fence removal, it can vary greatly depending on the size, type, and style of your pool fence.
On average, you can expect to pay between $5-$20 per square foot for removal. However, the cost could be as high as $3,100 or more depending on the complexity of the job.
Your local pool fence installer can help you get an accurate estimate of your project cost.
It’s also important to keep in mind that the cost of the new fence may also factor into your total project cost.
Shaking Poles to Unstick Them
Shaking the poles of a pool fence can be an effective way to unstick them if they become stuck.
The Guardian Pool Fence Company recommends shaking the poles front to back while pressing down on them.
This can help to loosen up any stuck connections, allowing for easier removal. It is important to note that if the poles are made of a material such as steel, they may require additional force to be removed.
In this case, using a jack with a chain with metal links may be necessary to provide sufficient leverage.
Additionally, our patented No Holes Pool Fence provides a sturdy base for our poles, meaning that the fence is already under duress.
So when it comes time to remove your pool fence, shaking the poles may be the best solution for getting them unstuck and ready for removal.
Removal and Storage of Pool Fence
Removing and storing a pool fence is an easy process, taking an average of 15 minutes to complete.
Start by unlatching the safety mechanism that connects the fence sections together.
Then, remove each fence post individually, shaking the poles to unstick them if necessary.
Finally, store the fence sections in a vertical position in a storage shed or garage. It’s recommended that you remove the fencing at least once a year to thoroughly clean it.
With these simple steps, you’ll be able to easily remove and store your pool fence in no time.
Is Growing a Vine on Your Pool Fence a Safe Idea if I’m Planning on Removing the Fence?
Before growing a vine on your pool fence, consider the potential hazards when removing the fence. If you decide to proceed, make sure the vine does not cling to the fence material, as this can cause damage. Research the best tips for growing vine on pool fence to ensure a safe and beautiful result.
Conclusion
In conclusion, pool fence removal is not as difficult as it may seem.
By following the steps outlined in this article, you can easily and safely remove your pool fence. It’s important to remember that pool fences should be removed when not in use to prevent accidents from occurring.
Additionally, it’s important to ensure that all latching mechanisms are properly secured and that all posts and poles are firmly attached before removing the fence.
If you have any questions about pool fence removal, it’s best to consult a professional for advice.