Inflatable bounce houses are a great way to keep children entertained during a party or event. However, accidents such as spills or rainy weather can cause water to accumulate on the bounce house floor.
Trying to enjoy an inflatable water park, for example, can leave you with damp clothes and poses serious safety risks.
To ensure that the play equipment remains safe and usable, it’s important to know how to get water out of an inflatable bounce house.
In this blog post, we will provide you with some easy and effective methods that you can use in the event of water accumulation in your inflatable bounce house. Read on to learn how…
1) Open the outlet tube and let the air circulate
To effectively remove water from an inflatable bounce house, the first step is to open the outlet tube and let air circulate.
By doing so, the remaining water inside the bounce house will be pushed out as the air circulates through.
This method prevents water from stagnating and eventually causing mildew or mold buildup.
It is important to note that air circulation should be continuous throughout the process of removing water from the inflatable bounce house.
Once the outlet tube is opened, the bounce house should be left for a few minutes to allow air to fully circulate throughout the structure.
This also makes the next steps of the cleaning process more effective.
2) Use towels to wipe off excess water
After you’ve let the air circulate through the outlet tube to remove as much water as possible, it’s time to get rid of any excess wet spots.
Grab some towels, and wipe them down until they’re dry. Don’t forget to get into any hidden corners and crevices!
To really ensure that all the water is removed, you can drench a clean towel in fresh water and wipe the solution clear.
Just make sure not to spray the bounce house with a hose, as this can cause damage.
Using towels and wiping everything down is essential to prevent mold and mildew from taking hold. Once you’ve dried it off as much as possible, leave it to air out for a bit. This can give the last remaining moisture time to evaporate.
Remember – the most important thing is to prevent water from getting into the seams in the first place.
But if some water does get in there, make sure you wipe it out as soon as possible. By taking these steps, you’ll help extend the life of your inflatable bounce house!
3) Dry hidden corners and crevices thoroughly
After using towels to wipe off any excess water from your inflatable bounce house, it’s important to pay close attention to the hidden corners and crevices. These areas tend to hold onto moisture, which can lead to mold and mildew growth.
To ensure the bounce house is completely dry, use a towel or rag to thoroughly dry any hidden corners or crevices. Don’t forget to get into every nook and cranny, including the seams and around the blower.
Allowing the bounce house to air out in the sun for at least six hours can also help to completely dry any remaining moisture.
Once everything is dry, use a degreaser on any stubborn spots to ensure the bounce house is clean and ready to go for your next event.
Remember, preventing water from getting into the seams of the bounce house is key to prolonging its lifespan.
Following these simple steps can help ensure your inflatable bounce house stays clean and dry for future use.
4) Open the zipper but do not turn off the blower
Now that the outlet tube is open and the excess water has been wiped away, it’s time to deflate the inflatable bounce house.
This can easily be done by opening the zipper flaps, vents, and ports. But before doing so, make sure to not turn off the blower just yet.
Instead, open a zipper while the blower is running, so that air can escape from the inside of the bounce house while it’s still inflated.
It’s important to keep the blower running during this process to ensure that all of the air gets pushed out and does not get trapped inside.
Once the zipper is open and the air is escaping, push down on the pool wall to let any remaining water drain out while the slide is still inflated.
This will ensure that all moisture is removed from the bounce house, preventing any mold or mildew growth.
Don’t forget to walk on the inflatable towards the port tube to help push out the air and allow for easier deflation.
It’s important to keep in mind that the blower should not be turned off until after all air is out of the bounce house.
Once the inflatable is completely flat, it’s safe to turn off the blower and disconnect it from the inlet tube.
Make sure to close all water vents and zippers tightly before reattaching and securing the blower to the inflation tube.
Following these steps will ensure that your bounce house is properly deflated and ready for storage until its next use.
5) Push down on the pool wall to drain while the slide is inflated
To drain the water from an inflatable bounce house, it’s important to follow a proper procedure. After opening the outlet tube and letting air circulate, the excess water should be wiped off using towels.
Dry hidden corners and crevices thoroughly to prevent mold growth.
The next step is crucial: open the zipper but do not turn off the blower, then push down on the pool wall to drain while the slide remains inflated.
This will prevent the water from collecting in the pool and protect the slide from damage. After draining as much water as possible, use a degreaser to remove stubborn spots.
When the main pool needs to be drained, tip the inflatable and allow the excess water to flow out. Leave the bounce house running in the sun for at least 6 hours to ensure it is fully dry.
Use towels to dry off Velcro and any large puddles to prevent slipping hazards. Remember to prevent water from getting into seams to avoid mold and mildew growth.
Following these steps will help keep your inflatable bounce house in good condition for years to come.
6) Use a degreaser to remove stubborn spots
After removing excess water from the inflatable bounce house, it is time to deal with those pesky and stubborn spots that soap and water cannot seem to handle.
This is where a degreaser solution comes in handy. Any degreaser will do, but if it fails to work, a bathroom or kitchen cleaner with bleach or sanitizer will also suffice.
To create a homemade bounce house cleaner, mix half of the spray bottle with water and add a few drops of dishwasher soap and equal amounts of vinegar.
This will make the perfect solution to remove spots and stains from the inflatable unit. Then, apply the solution to the dirty areas and scrub gently with a soft bristle brush, sponge, or rag.
In case of tough stains and grease, a professional strength cleaner like Bio-Clean can remove years of built-up water spots and mineral stains.
It is suitable for use in hospitals and schools, making it the best option for those who want a deeper clean for their inflatable bounce house.
Remember to keep rinsing towels with fresh water and, after cleaning, dry hidden corners and crevices thoroughly to prevent water from sitting, which may lead to mold and mildew growth.
Overall, using a degreaser solution is an efficient way to remove stubborn spots from an inflatable bounce house, ensuring a fun and clean playing environment for kids.
7) Drain water from the main pool by tipping inflatable
Now it’s time to remove the remaining water in the main pool area. The easiest way to do this is by gently tipping the inflatable from the edge.
Make sure you have removed all visible water by tipping and shaking the bounce house. You can even climb onto the bumper to help flatten it enough to let the water drain out.
Be sure to have a towel or two nearby to catch any residual water that may drip out. It’s important to get as much water out as possible to prevent any mold or bacteria growth.
This step also ensures that you won’t have any water sitting in the seams, which can cause damage and lead to premature wear and tear.
Once you’ve drained all the water, continue with the drying process.
8) Leave the bounce house running in the sun for at least 6 hours
After wiping off excess water and ensuring all hidden corners and crevices are dry, it’s time to leave the bounce house running in the sun for at least six hours.
This will help to ensure that any remaining moisture evaporates completely. It’s essential to walk around the bounce house frequently and monitor it to ensure that it remains inflated, and the blower continues to run.
Failure to leave the bounce house running for this length of time could result in mold and mildew growth, making it unsafe for future use.
So, it’s essential to make sure it’s thoroughly dry before storing it away. Although waiting for six hours may seem like a long time, it’s worth it to maintain the safety and longevity of your inflatable bounce house.
Why is Insurance Coverage Important for Bounce House Safety?
Bounce house insurance coverage is crucial for ensuring the safety of these popular party attractions. Accidents can happen, and without adequate insurance, the liability falls on the event organizer. With bounce house insurance coverage, injuries, damages, and even legal costs are financially protected. This ensures peace of mind and a worry-free experience for both parents and event organizers.
9) Use towels to dry off Velcro and any large puddles
After draining any standing water from the bounce house, the next step is to use towels to dry off any remaining puddles, especially around the Velcro areas.
This ensures that the unit is completely dry before storing it away. The towels can also be used to wipe off any dirt or debris that may have accumulated during use.
It is important to be thorough and not leave any damp areas, as this can lead to unwanted mold or mildew growth.
Remember to also push down on the pool wall to drain any water while the slide is still inflated. Keeping the bounce house running in the sun for at least 6 hours will help to further dry it out.
By following these steps, you can ensure that your inflatable bounce house stays clean and in top condition for frequent use.
How Can I Prevent Water Damage to My Bounce House?
To prevent water damage to your bounce house, follow these bounce house basics. First, be mindful of the weather and bring the inflatable indoors during heavy rain. Second, place the bounce house on a dry, level surface to avoid water pooling around it. Lastly, regularly inspect for any signs of water damage.
10) Importance of preventing water from getting into seams
Preventing water from getting into seams is essential for the longevity of the bounce house.
As mentioned earlier, water can prolong the drying time and can even lead to mold growth if left untreated.
To avoid this, it’s important to cover the stitches and prevent water from seeping into the bounce house or slide.
One way to prevent water from getting into seams is by using a waterproof cover when storing the inflatable.
This will keep the unit clean and dry, preventing moisture from getting in. Another way is to avoid using the bounce house during heavy rain or when there is standing water around the unit.
Water can seep through the seams even if it’s not directly raining on the unit.
Regular cleaning and maintenance can also help prevent water from getting into seams. As mentioned earlier, it’s important to dry sweep or vacuum the jump area before using any cleaning solutions.
When cleaning the bounce house, make sure to use a solution that won’t leave any residue or damage to the material.
It’s also important to thoroughly dry the unit after cleaning to prevent any moisture from getting trapped inside.
In short, preventing water from getting into seams is essential for the overall maintenance and longevity of the bounce house.
By taking proper care of the unit and avoiding any situations that can lead to water getting in, you can ensure that your inflatable will last for years to come.